Zenitron Class-D Bluetooth Speaker 60W

Application

• Battery Operated Speakers
• Wireless and Docking Speakers
• Sound bars
• Multi room Systems
• Home Theater Systems

Specification description

Audio Amplifier :

• Peak 2 x 80 W sine 1 kHz (RMS) into 4 Ω (10 %THD + N)
• Peak 2 x 40 W sine 1 kHz (RMS) into 8 Ω (10 % THD + N)
• Continuous 2 x 9.0 W sine 1 kHz (RMS) into 4 Ω (less than 0.02% THD + N)
• Under-voltage-lockout
• Over-temperature warning/error
• Short-circuit/overload protection
• Power stage pin-to-pin short-circuit
• Error-reporting through serial interface (I2C)
• DC protection
• I2C control (four selectable addresses)
• Heatsink free operation with EPAD-down package

Type-C:

• Fixed-function USB Type-C and Power Delivery controller supporting USB-PD Rev 3 and Type-C Rev 1.2
• Integrated precision Rd and dead-battery Rd termination resistors
• Integrated regulator to power from VBUS
• Supports a high-voltage P-MOSFET gate driver with slew-rate control
• Supports on-chip OVP and UVP to protect system from faults
• System level ESD protection on CC, VBUS, DP and DM pins. ±8kV Contact Discharge and ±15kV Air Gap Discharge
• based on IED61000-4-2 Level 4C

Bluetooth:

• Bluetooth 5.0, ADC, PWM, UART, I2C, SPI
• Module size: 12.00 mm × 15.50 mm × 1.95 mm
• Bluetooth 4.2 Smart Ready module
• Castellated solder pad connections for ease-of-use
• 512-KB on-module serial flash memory
• Up to 11 GPIOs
• Temperature range: –30 °C to +85 °C
• Cortex-M3 32-bit processor
• Maximum TX output power:

   +12 dBm for Bluetooth Classic

   +9 dBm for Bluetooth Low Energy

• RX Receive Sensitivity:

   –93.5 dBm for Bluetooth Classic, 1Mbps, GFSK

   –96.5 dBm for Bluetooth Low Energy

• Certified to FCC, ISED, MIC, and CE regulations.